Block Heater/Cooler "Dual Range"
Two independent workstations operating in the RANGE-10 ° C ÷ + 100 ° C
Dual temperature control heater/cooler dry bath incubator.
Thermoblock with double independent control of the temperature with two refrigerazion/heating stations operating both in the Range-10 ° C ÷ + 100 ° C.
Large load capacity: up to 8 smaller blocks, up to four 15 ml tube blocks and 50 ml and up to 2 microplate blocks of 96 wells, can be inserted into the two positions.
Dual temperature control dry bath incubator has high precision of temperature control and good sample preparation parallelism with microprocessor-controlled thermostat to replace the traditional water bath devices.
It can be widely used in the cultivation and preservation of samples ,DNA amplification, the electrophoresis of denaturation and serum coagulation.
Application sectors throughout pharmaceutical, chemical, food safety, environment, quality inspection, etc.
This series are pride of its compact appearance and excellent performance.
Features
- Unique dual temperature control slot can individually control temperature to make sure non interference
- One equipment to meet the demand for more experiments
- LED display, simple interface, double time and temperature setting,means simultaneous temperature and diminishing time display
- Fast heating/cooling speed, uniform heating/coling, accurate temperature control, high stability, low energy consumption and no noise
- Built in temperature calibration function, automatic fault detection and buzzer alarm function
- Built in over-temperature protection device, safe and reliable, enhance the service life of the machine
- Product designed compact and tight, occupied little space. Using freer and easier
- Various blocks for convenient replacement, easy for cleaning and disinfection
- Perfect high module sealing cartridge with cover can make 15 / 50ml high module totally enclosed with dry bath
Technical specifications
| Code |
MB/006/016 |
| Temperature control Range |
-10°C ÷ 100°C |
| Temp. Stability |
≤±0.5℃ (100°C)
≤±0.3℃ (40°C) |
| Block Temp. Uniformity |
≤±0.3℃ |
| Temp. Display Accuracy |
0.1℃ |
| Heating Speed |
≤15min (20℃ to 100℃) |
| Cooling speed |
≤25min (R.T. to 4℃) @R.T.26℃ |
| Time Range |
1 min ÷ 99 h 59 min / continuos |
| Voltage |
AC 220V / AC 110V, 50/60Hz
|
| Power |
200 W |
| Dimension (WxDxH) |
240×260×168 mm |
| Net Weight |
2,6 kg |
Aluminium blocks (optional accessories)
Wide range of interchangeable blocks that allow the best configuration of the instrument so that it can accommodate almost all types of tubes, microtubes and microplates from 96 well of the main houses spread on the Market.
Taking into account the load capacity of the different blocks you can configure the heater with different combinations of blocks.
In particular, the Microtube models can be housed in the number of 4 per compartment, for a total of 8 blocks.
Those for 15 and 50 ml tubes occupy two seats per compartment for a total of 4 blocks.
Finally the Microplate model can be housed occupying the entire compartment for a total of two blocks.
| Code |
Description |
| MB/006/019 |
Block 24×0,2 ml Øhole 6,1 mm
Qty can be accomodated: 8 pieces |
| MB/006/020 |
Block 12×0,5 ml Øhole 8 mm
Qty can be accomodated: 8 pieces |
| MB/006/021 |
Block 6×1,5 ml Øhole 10,8 mm
Qty can be accomodated: 8 pieces |
| MB/006/022 |
Block 6×2,0 ml Øhole 10,8 mm
Qty can be accomodated: 8 pieces |
| MB/006/023 |
Block 96×0,2 ml Øhole 6,1 mm
Qty can be accomodated: 2 pieces
(2 standard PCR microplates) |
| MB/006/024 |
Block 6×15 ml tubes Øhole 16,9 mm
Qty can be accomodated: 4 pieces |
| MB/006/025 |
Block 3×50 ml tubes Øhole 29,2 mm
Qty can be accomodated: 4 pieces |
Covers & Insulation high module
| Code |
Description |
| MB/006/027 |
Standard cover for lower size blocks |
| MB/006/028 |
Cover for higher size blocks suitable for high module insulation cover |
| MB/006/029 |
High module insulation cover for higher blocks |